5 Inch CCTV Tester Monitor 5MP AHD 5MP TVI 4MP CVI CVBS Analog Security Camera Tester Video Monitor with PTZ Controller/UTP Cable Test/VGA HDMI Input ;
- Video signal testing
- PTZ controller
- Image generator: Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section
- DC12V 1A output power
- Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
- Enhanced network cable testing: By UTP CABLE TEST port on the meter, you can test the connection of network cable.
- VGA/HDMI input: support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920 x 1440
- TVI camera test: HD TVI video surveillance testing, support 1MP 2MP 3MP 4MP 5MP. When TVI signal input, the tester will display HD TVI camera image.
- AHD camera test: HD video surveillance testing, support AHD 2.0 version,1MP 2MP 3MP 4MP 5MP. When AHD signal input, the tester will display the AHD camera image.
- CVI camera test: HD CVI video surveillance testing, support 1MP 2MP 3MP 4MP. When CVI signal input, the tester will display HD CVI camera image.
- LED lamp: It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
- The battery graphic display: The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.
- HD coaxial tester
- Adapter DC5V 1.5A（with USB cable)
- International Standard 18650 2600ma battery
- BNC cable
- RS485 connector
- Power output conversion cable
- Audio cable
- Tool bag
- Instruction Manual