Uniview NSW2000-16T2GC-POE 16 Port PoE Switch with Range Extender
Uniview PoE switches while delivering exceptional value and all the
standard features of other PoE switches also when used with Uniview
cameras can offer extended range of up to 250m.
- 16×10/100Mbps Ethernet ports
- 2×Gigabit combo port (RJ45 and SFP)
- All 100Mbps ports support PoE
- PoE complies with IEEE802.3af/at, up to 30W for single port
- Up to 250m transmission distance on EXTEND mode
- Easy to use, no need to configure
- High quality with all metal housing
- Maximum PoE output 250W
|
Item
|
Description
|
|
Ports
|
16×10/100Base-TX autosensing Ethernet ports(all
support PoE)
2×Gigabit combo port (RJ45 and SFP)
|
|
Port attribute
|
10/100/1000Mbit/s transfer rate
Half-duplex, full-duplex and auto-negotiation
Auto MDI/MDIX
|
|
Standards
|
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
ANSI/IEEE 802.3 NWay
IEEE 802.3x flow control
IEEE 802.3af PoE
IEEE 802.3at PoE
|
|
MAC
|
4K
|
|
Packet forwarding rate
|
6.55Mpps
|
|
Switching capacity
|
8.8Gbps
|
|
EXTEND mode
|
Disabled: all ports can communicate with each
other, and monitoring optimization is disabled.
Enabled: Downlink ports can only communicate with
uplink ports, monitoring optimization is enabled, and transmission
distance can be extended to up to 250 meters.
|
|
Status LEDs
|
Link/Act (steady green): link is normal
Link/Act (flashing green): data is being forwarded
Link/Act (off): no link
|
|
PoE (steady orange): the port is powering a
powered device properly
PoE (off): the port is not connected to any
powered device or is not supplying power
|
|
Power (steady green): AC input is normal
Power (off): AC input is abnormal
|
|
PoE
|
802.3at/af
Max PoE capacity: 250 W
|
|
Consumption
|
≤ 300 W
|
|
AC voltage
|
100-240V
|
|
Operating temperature
|
0°C-40°C (32°F-104°F)
|
|
Operating humidity
|
10%-85%
|
|
Storage temperature
|
-10°C-70°C (14°F-158°F)
|
|
Storage humidity
|
10%-90%
|
|
Dimensions (W×D×H)
|
440mm×280mm×44mm (17.3"×11"×1.7")
|
