4 Port PoE Switch ,802.3af/at PoE+ 100Mbps Extend to 250Meter

(image for) 4 Port PoE Switch ,802.3af/at PoE+ 100Mbps Extend to 250Meter
4 Port PoE Switch ,802.3af/at PoE+ 100Mbps Extend to 250Meter
  • Model: ET-PoE-104-2ET
  • Shipping Weight: 1.5 lbs
  • 10 Units in Stock

 Ask a Question 


Add to Cart:

6Ports (2Uplink, 4 PoE) Power Over Ethernet Switch IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)

it's suitable for Hikvision, DAHUA and other brands with IEEE802.333af/at PoE Powered Devices(PD)

Support EXTEND mode, max Network Cable length to 250 meters

Main Features: 

  • Support EEE802.3at(30W)/af(15.4W) standards, automatically detect IEEE 802.3at/af devices and supply power for them via Ethernet
  • Support EEE802.3at(30W) Standard, compatible with IEEE802.3af(15.4W) powered device(PD)
  • 5 Ports 10/100M self-adaption RJ45, 4 Ports support PoE, 1 Port 100m UP-Link
  • Single port power can be up to 30W
  • PoE pin: Endspan 1/2 (+), 3/6 (–)
  • Support IEEE802.3X full duplex transmission and backpressure half duplex transmission
  • Support port automatically turning(Auto MDI/MDIX)function
  • All ports support line-speed forwarding
  • Support MAC add automatic learning and aging
  • LED indicators; Input Power AC Input Voltage: AC 100V ~ 220V; 
  • Simple and convenient to use, no need to configure, plug and play, can flexibly extend network without power layout limitation
  • Network Signal Distance: Max to 250m
Model number ET-PoE-104-2ET
Port 2 Port Up-link 10/100M self-adaption
4 ports Support PoE,
Support automatic turning
Network transmission
10BASE-T: CAT3/CAT4/CAT5 UTP(≤100m)
100BASE-TX: CAT5 UTP or above(≤100m)
IEEE802.3 af Support 15.4W
IEEE802.3at /td> Support 30W
LED indicator /td> Power, Link/Act, 100Mbps, PoE Status
Working Environment
Working temperature: 0~40C
Storing temperature: -30~70
Working humidity: 10%~90%(no condense)
Storing humidity: 5%~90%(no condense)
Input Power AC 100V-220V
Support IEEE 802.3, 802.3u, 802.3x, 802.3af,802.3at
Basic functions Compliant to IEEE 802.3at/af standards powered device(PD)
Port power supply priority 
line-speed forwarding
MAC automatically study and age 
IEEE802.3X full duplex transmission and Backpressure half duplex transmission
Switch capacity 1Gbps
MAC add list 1K
Forwarding rate 10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port

Packing list:

  • 1x 5 Port POE Switch
  • 1x Power Cord(US)
  • Tip: This Model Support AC 110-220V

Support EXTEND mode, max Network Cable length to 250 meters

NOTE. When EXTEND mode enable, the Max bandwidth for the Power Link (PoE) port 1-4 network port will be reduced to 10Mbps for each one. Please check your IP CAMERA's bit stream setting. We recommend the value does not over 8Mbps(8192Kbps).

(The up-link is not affected, it will always working at 100Mbps max speed)

(If you switch to the EXTEND mode, the Max allowable Network Cable length will increased to 200 meters. So we use 54V power built-in. This will avoids the power loss over the long distances, and will make sure the PoE IP Camera working.)

Your IP Address is:
Copyright © 2024 DiySecurityCameraWorld. All Right Reserved

Website security