NSW2010-26GT2GC-POE-IN Uniview 24 Port Gigabit POE Switch with 2 Gigabit
Uplink
Uniview PoE switches while delivering exceptional value and all the
standard features of other PoE switches also when used with Uniview
cameras can offer extended range of up to 250m.
- 24×10/100/1000Mbps Ethernet ports
- 2×Gigabit combo port (RJ45 and SFP)
- All 1000Mbps ports support PoE
- PoE complies with IEEE802.3af/at, up to 30W for single port
- Up to 250m transmission distance on EXTEND mode
- Easy to use, no need to configure
- High quality with all metal housing
- Maximum PoE output 400W
Item
|
Description
|
Ports
|
24×1000Mbps PoE ports (RJ45)
2×Gigabit combo port (RJ45 and SFP)
|
Port attribute
|
10/100/1000Mbit/s transfer rate
Half-duplex, full-duplex and auto-negotiation
Auto MDI/MDIX
|
Standards
|
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab,
IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az
|
MAC
|
8K
|
Packet forwarding rate
|
41.7Mpps
|
Switching capacity
|
56Gbps
|
Working mode
|
Default(Normal mode): All ports can communicate with
each other. VLAN(Secure mode): Downlink ports can
communicate only with uplink ports. EXTEND(Surveillance
mode): Transmission distance up to 250 meters. Downlink ports can
communicate only with uplink ports. |
Status LEDs
|
Link/Act (steady green): link is normal
Link/Act (flashing green): data is being forwarded
Link/Act (off): no link
|
PoE (steady orange): the port is powering a
powered device properly
PoE (off): the port is not connected to any
powered device or is not supplying power
|
Power (steady green): AC input is normal
Power (off): AC input is abnormal
|
PoE
|
802.3at/af
Max PoE capacity: 400 W
|
Consumption
|
≤ 370 W
|
AC voltage
|
100-240V
|
Operating temperature
|
0°C-40°C (32°F-104°F)
|
Operating humidity
|
10%-85%
|
Storage temperature
|
-10°C-70°C (14°F-158°F)
|
Storage humidity
|
10%-90%
|
Dimensions (W×D×H)
|
440mm×280mm×44mm (17.3"×11"×1.7")
|